Log-In
Acrobat Reader
Some site information
requires Acrobat Reader.

Automated Baggers/Sealers

 
T-1000 & T-1000W (Wide) Advanced Poly-Bagger™
 
The T-1000 Advanced Poly-Bagger™ is our "top-of-the-line bagger". It is no wonder the T-1000 is also our best-selling machine! Designed for long or short runs, the T-1000 has the capability of cycling over 100 bags per minute, faster than any operator could manually feed. The T-1000 is also fast enough to keep up with automatic infeed equipment including vibratory bowl counters, scales and infeed conveyors. The T-1000 Advanced Poly-Bagger™ is also designed to run inline with punch/stamp presses, injection mold machines, blister machines and other continuous feed manufacturing equipment for inline bagging.
 
The T-1000 Advanced Poly-Bagger™ can reduce your packaging costs with high speeds, versatility, reliability and simplicity.
 
 
High Speeds: Indexes, opens, seals, and tears off bags at high rates over 100 cycles per minute.
 
Versatility: Bags virtually any product including fasteners, hardware, injection molded parts, kits, crafts, foods, medical devices and more. Runs bags produced from LDPE, LLDPE, HDPE, Foil, Polypropylene, Tyvek™ and various barrier films. The T-1000 Advanced Poly-Bagger™ is ideal for short runs where product, bag size or print changes are performed in minutes.
 
Reliability: Crafted from the highest quality components and materials, this bagger is built to withstand the most rigorous manufacturing environment. Machined side frames are assembled on a milled table for perfect roller alignment. From its "off-the-shelf" components, cast inner frame and sturdy mounts with casters, we guarantee long life, continual use and minimal maintenance.
 
Simplicity: A "user-friendly" touch screen/pop-up window program allows the operator to setup bag options and auxiliary equipment, save the settings in memory, and recall job settings for repeat runs. Manual operation is as simple as inserting the product and pressing a foot switch.
 
Standard Features
  • "User-Friendly" Touch Screen Interface Panel: Change settings "on the fly”, turn on counters or other options, control machine speed, or other auxiliary equipment. Programmable for up to thirty settings. Quickly position the operator panel wherever you desire with a long arm extension and ball joint mounting bracket.
  • Patented "Teflon Shield™" moves Teflon away from heater bar, except when sealing, for extended Teflon life up to 10 times the life of standard sealers.
  • Uses Advanced Poly-Bags™ (pre-opened bags on rolls, manufactured by Advanced Poly-Packaging, Inc.) with sizes ranging from 2" x 3" to 14" x 30" and thickness from 1 mil to 5 mil. T-1000 "Wide" uses bags ranging from 4" x 6" to 24" x 30".
  • Designed with a small footprint and equipped rugged casters, the T-1000 Advanced Poly-Bagger™ is designed for easy movement to various production cells throughout your plant.
  • The T-1000 Advanced Poly-Bagger™ is crafted from the highest quality components and materials to withstand the most rigorous manufacturing environment. We guarantee long life with minimal maintenance (one year parts warranty).
  • Energy Conservation & Component Saver provides for extended component life. The T-1000 Advanced Poly-Bagger™ is programmed to turn off components when not in use including the touch screen, motor, air and heater bar.
  • Four internal counters are standard: 1) Preset Counter - the bagger stops when the predetermined count has been reached. 2) Totaling Counter - reset this counter at the beginning of each shift or day to record packaging production over a period of time. 3) Continuous Strip Counter - set the number of bags (not separated at the perforation) to feed in a continuous strip. 4) Maintenance Counter - total machine cycle counter for preventative maintenance/component inspection intervals.
  • Anti-Jam Device - Detects obstructions in the seal area, automatically reverses the pressure bar and stops the cycle operation.
  • Technical assistance screens provide access to INPUT/OUTPUT IO without removing covers.
  • Pop-up troubleshooting screens indicate operation messages as well as fault conditions.

"User-Friendly" Touch Screen Interface Panels

Specifications
Description
T-1000 Standard
T-1000 Wide
Weight
275 lbs.
325 lbs.
Dimensions
37" width x 42" depth
47" width x 36" depth
Memory
32 job saves
32 job saves
Load Height
30 - 41"
30 - 41"
Cycle Rate
100 bags/min.*
100 bags/min.*
Seal Bar
15" wide bronze
25" wide bronze
Bag Size Minimum
2" x 3"
4" x 6"
Bag Size Maximum
14" x 30"
24" x 30"
Product Pass Through
4-3/4" (up to 8")
7-3/4"
Electric
110/220V, 60/50Hz
110/220V, 60/50Hz
FLC
10 amps
10 amps
Air
1.5 cfm, 80 psi
1.5 cfm, 80 psi
Touch Screen, Funnel,
Foot Switch, Guards,
Manual, 1 Year Parts Warranty
Included
Included

 
T-1000M Medical Advanced     Poly-Bagger™
 
The T-1000 Medical bagger incorporates all the features of the T-1000 standard baggers including Touch Screen operation with "pop-up" windows, components saver, job save features, production graphs and troubleshooting technical support messages. The T-1000 Medical Advanced Poly-Bagger™ also includes options and features required for medical validation for seal integrity.
 
  • Solid bronze, 1/4" constant heat seal bar.
  • Seals Tyvek¨/polyester, polyethylene, foil-laminates and other barrier films including HDPE, LDPE, LLDPE, Polypropylene, Nylon barrier films.
  • Low pressure detector prohibits seal operation when pressure is below required levels.
  • Low temperature detection prohibits seal operation when temperature is below programmed settings for medical validation of seal temperature.
  • Stainless steel construction, non corrosive components and oil-free operation provide cleanroom access of this bagging system.
  • Equipped with 4 micron filter, air is filtered entering the bag
 
Tyvek® Pre-Opened Bags
 
 
T-1000H Horizontal Advanced Poly-Bagger™
T-1000 Horizontal Wide Advanced Poly-Bagger™
 
The T-1000 Horizontal Bagger™ offers versatile solutions to packaging a wide variety of products that are difficult to load on a vertical bagger. Manually slide your product horizontally into the bag, or automatically push the product into the bag and your bagger does the rest! After the product enters the bag, the bagger seals the bag at the loading station and automatically discharges the product on a horizontal take away conveyor. The next bag is then indexed into position and blown open, ready to receive the next product.
 
  • Standard Touch Screen Operator Panel allows the operator to track production, adjust settings and receive technical operation information. Up to 32 jobs can be saved for instant job changeover. Pop-up numeric keypads and other window and message screens provide fast setting changes and prompt information to operators.
  • A Solid Bronze Heater Bar maintains constant heat with "independent action" sealing. Coupled with our patented Teflon Shield and Anti-Jam obstruction detection, we guarantee perfect seals and low maintenance.
  • A horizontal flat belt conveyor removes product from the sealing area to further packing stations. Increased product pass-through for products up to 8" thick.
  • Package a variety of products including gasket kits, clothing, towels and sheets, large gaskets, filters, manuals, kits with instructions, coils of rope or cable, bread or other bagged goods, and more.
  • Compact design to "fit" in any packaging operation (shown below with optional Ti-1000 Thermal Transfer Printer). Print inline while loading your product; stop applying pressure sensitive labels. Print part numbers, text, logos, graphics and bar codes directly to the surface of the bag. See the Ti-1000 Thermal Transfer Printer Product page for details.
  • Tilt the bagger to assist in loading. Gravity does the work!
  • Stainless "Slide" Plate provides a low friction surface with easy-open bag and product guides.
 
 
Specifications
Description
T-1000 Horizontal
T-1000 Wide Horizontal
Weight
282 lbs.
332 lbs.
Dimensions
36" width x 81" long
(including 3' conveyor)
47" width X 93" long
(including 4' conveyor)
Memory
32 job saves
32 job saves
Load Height
40"
40"
Cycle Rate
100 bags/min.*
100 bags/min.*
Seal Bar
15" wide bronze
25" wide bronze
Bag Size Minimum
3" x 5"
4" x 7"
Bag Size Maximum
14" x 30"
24" x 30"
Product Pass Through
Up to 8"
Up to 8"
Electric
110/220V, 60/50Hz
110/220V, 60/50Hz
FLC
10 amps
10 amps
Air
1.5 cfm, 80 psi
1.5 cfm, 80 psi
Touch Screen, Funnel, Foot Switch, Guards, Manual, 1 Year Parts Warranty
Included
Included
Conveyor Specifications
 
 
Exposed Belt Width
12"
18"
Length
3' Standard (up to 100')
4' Standard (up to 100')
Height
Adjustable Height & Tilt
Adjustable Height & Tilt
Belt Speed
Up to 50'/min.
Up to 50'/min.
Motor
1/8 HP, DC
1/8 HP, DC
*Dependent on bag size and product
 
 
    MacKenzie and Partners Inc. - Packing Films, Systems and Solutions
    Powered by LookNow.ca